ECV : The pneumatic distributor from 3 to 8 m

The pneumatic distributor for plant cover that makes all the difference and can adapt an all types of soil-working machines...

1 - A maximum performance pneumatic system !

(used on several models of pneumatic seeders for plant cover)
1 — The seeds fall into the air-flow.
2— The seeds are pushed by the air-flow, but some types of seed are blown back by the turbulence.
So, not all types of seeds can be sown !
To avoid this, ...

The ECV by SEPEBA uses the venturi nozzle principle

Thanks to its original pneumatic system that reduces blowback phenomena and optimizes seed transport, the SEPEBA distributor is as efficient with light seeds (ray-grass) as with heavy ones (wheat).

2 - Accurate dosing for versatile seeding

2 - Accurate dosing for versatile seeding

Its easily interchangeable rotors allow the SEPEBA seeder to accurately spread either colza at 5 kg/ha or barley at 120kg/ha*, or even more depending on the width of seeding. The SEPEBA plus-point: We can manufacture tailormade rotors for you, to meet your specific needs.
* These values are given for information purposes and vary depending on the width of the seed beds and the sowing set-up being used (slope of seed-tubes in particular).

Example flow-rate table for sowing on 4 m wide at 10 Km/h. These figures are given for information purposes; they vary depending on the size of the seed, its shape, sowing conditions (slopes in particular).
Certain high flow-rates for large seeds require the use of fans or air-turbines of higher volume than the standard fan.

A height-adjustable brush seal regulates the filling of the rotor to give perfect regularity.

Capable of sowing a very wide range of seeds, the SEPEBA plant cover distributor has been designed to provide either very high or very low doses thanks to the design of its blower, its various rotors and its adjustment system.

3 - Very accurate localization of the seeds

The SEPEBA seed-spreading devices are designed to place the seeds very accurately, on a band of about 30 cm in relation to tractor’s direction of movement. This allows the seeds to be placed exactly where you want : between the discs and the rear-roller or even between 2 rows of discs …
Definitely an essential factor in the success of your sowing !

4 - Easily adjustable, fast and reliable flow-rate

We’ve chosen a flow-rate adjustment system using a gearbox with interchangeable sprockets, for its simplicity, sturdiness and high reliability. A spring tension adjuster allows the sprockets to be changed very quickly (approx 2 min). The choice of sprocket is easy thanks to the adjustment notice which gives the combination of sprockets corresponding to the required dose.

For electrically powered models, an electronical adjustable speed control exists as an option. It enables to get a wider range of flow-rates and to adjust the dosage from the driving post of the tractor. It is as well possible to get a FPS (flow-rate proportional to ground speed) version of this electronical adjustable speed control.

3 types of drive to fit your needs

With the sprocket adjustment, an electrical drive system with a start/stop box is provided as standard. Very easy to mount and to move from one soil-working machine to another, this economical solution suits most uses, where the tractor speed can easily be maintained constant.

To get a flow-rate proportional to ground-speed, an independent wheel is available, with transmission by universal block or cable depending on the type of machine the distributor is mounted on. This solution is suitable wherever the conditions of use involve a variable ground-speed (steep slopes, very heterogeneous soils…).

Designed to make your work easier

We designed the SEPEBA distributor with you in mind: we wanted it to be practical and reliable.
- Agitator at the base of the hopper so as to have regular down-flow and so avoid “arching” in the hopper
- Complete and instant drain shutter to save time when the seeding operation is complete
- Adjustment container: A container fitted on the machine allows you to carry out your tests for the distributor settings.

Complete equipments for all types of machines:

We provide you with complete equipment:
- air distributor with 8 outlets, hopper size 240 litres, 150litres,
or 600 litres (tailor-made hoppers available as optional extras)
- support frame
- 3-speed double electric high-volume air turbine
- 30 mm seed transport tubes
- 8 precision spreaders
- 1 rotor to be chosen depending on your needs

Thanks to its small working width and its flexible-tubes transport system, the SEPEBA distributer is suitable for mounting on all types of soil-working machines: stubble cutters, tine harrows; but also seeders (for combined or interseeding seeding), combine-harvesters …

Technical data sheet

© 2007-2009 SEPEBA • Legal notice  •   Creation : Futur Tech  •   Site Map  •   Writer access
This site doesn't collect any personnal data neither does set cookie otherwise technically necessary